Tips For Getting A Smooth Surface With High-Gloss Paint

If you want to brighten the walls in your home or make your residence a more modern one, then it may be time to refresh the paint in your house. You may notice that you have many different options when it comes to paint. One of the most important is the sheen of the paint itself. High-gloss paint is one type that is quite popular, and it has many advantages over other types of paint. It is extremely durable, moisture resistant, and bright. While this is true, you may have some difficulty applying the paint to your walls. Keep reading to learn about some tips that will help you to add the paint to the interior of your home. 

Buy The Right Roller

One of the drawbacks to purchasing and applying high-gloss paint is the fact that streaks and lines will likely appear in the finish if you do not apply it with the correct tools. Specifically, brush strokes will likely appear, so it is best to avoid the use of a brush altogether if you can. If you do decide to use a brush for trim, then work slowly and carefully and purchase a brush with synthetic bristles. Also, one with exploded bristles is best. These brushes feature bristles with split ends. These brushes pick up more paint and allow you to add paint more smoothly to the wall. 

Along with exploded-bristle brushes, you will need to get the right type of rollers. You want rollers that have a fairly large or deep nap. Ones that are labeled as three-eighths or one-half inch are best. These rollers allow for a smooth finish. You should look for rollers made from synthetic materials, because cotton and wool rollers can create an uneven appearance. Foam rollers are the best choice for applying high-gloss paint. They create no pattern on the wall, and they pick up a good deal of paint as they are moved through the paint tray.

Clean Properly

One drawback to high-gloss paint is the fact that it does show every scratch, ding, and imperfection in your wall. This means that you need to use wood fillers, plaster compounds, and drywall patch materials to make repairs. You also need to clean your walls thoroughly. Dirt and debris will keep the paint from sticking, and this will interfere with the glossy appearance of the paint. In other words, you will notice patchy, uneven, and flat areas of paint. 

To clean your walls, you should use cleaners that can dissolve grease and dirt and remove oily residue. Ammonia can do this, so add about one-cup of ammonia to a five gallon bucket of water. Mix the solution and then use a sponge to scrub your wall. Afterwards, use dish soap and warm water to remove the ammonia, and then wipe the walls with a dry cotton cloth. Inspect the walls for signs of stains or debris afterwards. You can use vinegar to release stains that remain. This is wise to make sure stains to not show through the paint. 

If you'd rather have a professional handle your interior paint job, contact an interior painting service like Thompson Painting.

Share